Insulation and installation underlays
Multimoll Softsonic 4mm Insulating and stress-relieving Mat
The UZIN Multimoll Softsonic 4 mm insulation and decoupling mat reduces impact and resonance sound at a low installation height. Multimoll Softsonic compensates for shear and tensile stresses that occur between the substrate and the covering, has a crack-bridging effect and at the same time reduces the impact and resonance sound that often occurs with tile and slab coverings.
Multimoll Top 12 Insulation and renovation board
UZIN Multimoll Top 12 is a 12 mm thick, multi-layer panel for the renovation sector. The insulation and renovation board decouples substrate and top covering from shear and tensile stresses. At the same time, the walking and living comfort is significantly increased. Thanks to its excellent thermal insulation properties, Multimoll Top 12 also supports poorly insulated substrates.
Multimoll Top 4 Stress-relief mat
The tension-isolating decoupling mat Multimoll Top 4 is a multi-layer panel that reduces shear and tensile stresses and thus protects the topsoil. By using Multimoll Top 4, walking and living comfort is increased and sound insulation improved despite the low construction height. Better thermal insulation is achieved at the same time.
Multimoll Top 7 Insulation and renovation board
UZIN Multimoll Top 7 is a multi-layer panel for the renovation sector. The insulation and renovation board decouples substrate and top covering from shear and tensile stresses. At the same time, walking and living comfort is increased. Thanks to its heat-insulating properties, Multimoll Top 7 also supports substrates with little heat insulation.
UX 250 Reinforcement and stress-relieving fleece
The codex UX 250 reinforcing and stress-relieving fleece is an alkali-resistant fleece underlay for reducing shear and tensile movements between the substrate and the surface covering. The reinforcing and stress-relieving fleece is flexible and breathable.
UX 410 Armoured fabric
The armour fabric codex UX 410 is an alkali-resistant glass-fibre fabric for reinforcing levelling compounds and thin-bed mortars. Thanks to its high tear resistance, codex UX 410 improves the load-bearing capacity and stabilises the substrate for safe laying.
UX 430 Fabric decoupling mat
Decoupling mat with glass mesh fabric to increase bending stiffness under tile and natural stone coverings
X-Change Tile-Change System
The replacement system codex X-Change consists of two products, fixation and fleece, and enables the rapid replacement of tiles and natural stone coverings.
