Do you have any questions?

We are happy to help.

[CX International] Flyout

Consulting

Customer service

Technical support

Location

Codex near you

Do you have any questions?

We are happy to help.

[CX International] Flyout

Consulting

Customer service

Technical support

Location

Codex near you

Tiling work in the new building.

Data

Building type Public building (International)
Area (m²) 1.500 m²
CountryGermany
FloorerKlaus Dieckerhoff GmbH & Co. KG

The entire tiling work as well as the laying of concrete blocks in the new building of the Campus FH, Mönchengladbach, was carried out by Klaus Dieckerhoff GmbH & Co. KG.

The team laid porcelain stoneware and concrete stone over an area of around 1,500 m².
The row showers were also resealed.


All codex products used:

- codex Sicherheitsabdichtungen
- codex HS 600
- codex FG 300
- codex Power CX 3
- codex Power RX 6 Turbo
- codex Power Flex Basic
- codex NC 395
- codex FM 50 Turbo
 

Products used

FG 300

codex FG 300 is a dispersion primer for absorbent, mineral substrates. The FG 300 is versatile, water-dilutable and easy to use and offers highest safety due to its good penetration capacity.

Data sheet

Power CX 3

The flexible thin-bed mortar codex Power CX 3 is universally usable and suitable for all ceramic wall and floor coverings.
Thanks to its plastic coating, it meets the C2 TE S1 requirement of…

Data sheet

Power RX 6 Turbo

The rapid setting, highly flexible thin- and flow-bed mortar codex Power RX 6 Turbo is suitable for the installation of wall and floor coverings.

Data sheet

NC 395

The codex NC 395 gradient filler is a flowable cement floor filler for layer thicknesses of 3-50 mm. It is ideally suited for producing gradient levelling compounds up to 4% in interior and…

Data sheet

FM 50 Turbo

The tile filler codex FM 50 Turbo is a self-levelling cement floor levelling compound for layer thicknesses of 3-50 mm. codex FM 50 Turbo hardens very quickly and is ready for covering early,…

Data sheet

codex GmbH & Co. KG

Germany

Please note. Depending on the country you choose you will be forwarded to the homepage of the subsidiary. You will find the responsible contact person on the imprint page.