NC 210 1-Component Flex-Sealer-Slurry

The 1-component flex sealing compound codex NC 210 is a flexible composite sealing compound for the waterproofing of surfaces that are particularly exposed to moisture and wetness.

Consumption calculator

Applications

  • For load class A0, B0 as well as A and B according to the ZDB bulletin
  • For water impact classes W0-I, W1-I, W2-I, W3-I according to DIN 18534
  • For water impact classes W1-B and W2-B according to DIN 18535
  • For sealing balconies, loggias and walkways according to DIN 18531-5
  • Meets the requirements CM 01P according to EN 14891
  • For balconies and patios with a slope > 1.5%
  • For showers, baths and toilets
  • For swimming pools and their surrounding area
  • For saunas and therapy basins
  • For domestic and commercial areas
  • For retirement homes and hotels
  • For interior and exterior use
  • On calcium sulphate and cementitious screeds, concrete
  • On gypsum, lime cement and cement plaster
  • On gypsum carton and gypsum board plates, tile carrier elements
  • On underfloor heating, on walls and floors

Properties

  • Very high pressure water tightness, suitable for water depths up to 4 m
  • Resistant to frost and ageing
  • Smooth and easy to process - low consumption, therefore very economical
  • Easy to measure out, partial quantities also possible
  • Flexible and crack-bridging
  • Water vapour diffusion
  • Waterproof
  • Ideal matching with codex sealing accessories
  • With general test certificate by building authorities
  • Highest quality level 1 according to DGNB criterion ENV 1.2 Risks for the local environment

The mineral sealing slurry codex NC 210 is 1-component and is used for sealing with very high water loads in interior and exterior areas.

Technical data

*At 23 °C and 50 % rel. humidity.
Pack type

paper bag

Pack size

15 kg

Shelf life

6 months

Color

grey

Ideal working temperatures

+ 5 to + 25 °C

Water quantity required

4.2 - 5.4 litres per 15 kg bag

Working Time/ Pot Life

approx. 1 hour*

Minimum dry coat thickness

2 mm

Drying time 1st coat

after approx. 5 hours*

Drying time 2nd coat

after approx. 5 hours*

Set to foot traffic

after approx. 5 hours*

Ready for covering

after approx. 5 hours*

Burning behaviour

B2

Consumption

3 - 3.5 kg/m²

Ordering information

Article Item no. Packsize Shipping unit
codex NC 210 / 15 kg 21500 15 kg
Pallet:
54 bags

Quality seals and badges

ce

References

The Onya Hotel Resort & Spa, Bellwald, CH

Schottenhammel´s Löwenbräukeller

Palais du Rhin Cologne

Motel One, Düsseldorf

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools