Complete surface renovation gives the swimming pool a new shine.

Data

Building type Swimming pools
Date 27.08.2019
Area 600 m²
Country Germany

The swimming pool with sauna and wellness area on the island of Fehmarn offers a unique view of the Baltic Sea. To make the interior shine again, the bath was subjected to a complete surface reconstruction in the area of the pool circulation, the entire floor surfaces in the wet area as well as the tiled running surfaces in the dry area.

 

The project

After removal of the old tiling, the subfloor had to be prepared. First, a self-levelling compound was applied for a levelled surface, which was then sealed with a Flex sealing slurry and sealing sheet. With the laying and grouting of 600 m² of ceramic tiles in 25 x 50 cm format and glazed porcelain stoneware, the project was completed on time after 10 weeks, in accordance with the set deadline. A high hygienic demand on the finished floor surfaces for a long-term and therefore sustainable result as well as the implementation of a larger format to the existing slope situation were the primary requirements of the project, which M&M Moritzen Fliesen GmbH from Gremersdorf took on.

 

All codex products used:

- codex NC 395
- codex NC 210
- codex Hydrostop
- codex CX 3
- codex X-Fusion
- codex FG 300
- codex NC 366 Maxx

 

Products used

X-Fusion 3-C Design Epoxy Mortar

Effortless processing with the award-winning 3-component epoxy grout. codex X-Fusion is suitable for bonding and grouting optically attractive ceramic coverings. Due to the fine and closed joint surface, the joint is very hygienic and easy to clean.

Power CX 3 Flex thin-bed mortar

The flexible thin-bed mortar codex Power CX 3 is universally usable and suitable for all ceramic wall and floor coverings.
Thanks to its plastic coating, it meets the C2 TE S1 requirement of EN 12 004 and is suitable for mortar bed thicknesses up to 10 mm.
The codex Power CX 3 is also available in a white version for use with translucent ceramics.

FG 300 Primer

codex FG 300 is a dispersion primer for absorbent, mineral substrates. The FG 300 is versatile, water-dilutable and easy to use and offers highest safety due to its good penetration capacity.

Hydrostop Sealing and stress-relieving roll

codex Hydrostop is a water-impermeable, crack-bridging sealing and decoupling membrane under tile and natural stone coverings. Suitable for reliable sealing of substrates exposed to moisture.

NC 366 Maxx Smoothing Mortar

codex NC 366 Maxx is a low-slump levelling mortar with lightweight fillers for layer thicknesses of 3-50 mm. The lightweight render is very stable and therefore ideal for use on the walls.

NC 395 Slope levelling compound

The codex NC 395 slope levelling compound is a flowable cement floor levelling compound for layer thicknesses of 3 - 50 mm. It is optimally suited for the production of slope levelling up to 4% in interior and exterior areas.

NC 210 1-C Flex-Sealer-Slurry

The 1-component flex sealing compound codex NC 210 is a flexible composite sealing compound for the waterproofing of surfaces that are particularly exposed to moisture and wetness.

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools