Do you have any questions?

We are happy to help.

[CX International] Flyout

Consulting

Customer service

Technical support

Location

Codex near you

Do you have any questions?

We are happy to help.

[CX International] Flyout

Consulting

Customer service

Technical support

Location

Codex near you

New construction of the 4-star superior boutique hotel.

Data

Building type Hotel and catering (International)
Area (m²) 600 m²
CountrySwitzerland
FloorerPlattenlegergeschäft Lambrigger GmbH

In the 600 m² large new building of the 4-star superior boutique hotel, ceramic tiles were laid in the entrance area, on the stairs, in all rooms and bathrooms as well as in the wellness area. Products from codex were used. For example, in the wellness area, the tile layers from "Lambrigger GmbH" used the epoxy resin mortar codex Epo Tix, which, due to its high resistance to chemicals, can withstand even the highest loads and was therefore ideally suited.

Products used

BST 150

The self-adhesive sealing tape codex BST 150 is part of the composite waterproofing under ceramic coverings and for corner and transition areas, as well as for codex balcony systems.

FG 300

codex FG 300 is a dispersion primer for absorbent, mineral substrates. The FG 300 is versatile, water-dilutable and easy to use and offers highest safety due to its good penetration capacity.

NC 210

The 1-component flex sealing compound codex NC 210 is a flexible composite sealing compound for the waterproofing of surfaces that are particularly exposed to moisture and wetness.

FM 100

Low-dust working with the dust-reduced filler codex FM 100 - The self-levelling cement floor filler with Level-Plus Effect for every layer thickness range.

Power RX 8

The rapid setting, highly flexible thin-bed mortar codex Power RX8 is particularly suitable for the installation of large format tiles thanks to its crystalline water-binding properties.

Power CX 3

The flexible thin-bed mortar codex Power CX 3 is universally usable and suitable for all ceramic wall and floor coverings.
Thanks to its plastic coating, it meets the C2 TE S1 requirement of EN 12 004 and is suitable for mortar bed thicknesses up to 10 mm.
The codex Power CX 3 is also available in a white version for use with translucent ceramics.