Power CX 5 Low-dust flex thin-bed mortar

The flexible, low-dust, thin-bed mortar codex Power CX 5 is for the installation of ceramic wall and floor coverings.
Thanks to its plastic coating, it meets the C2 TE S1 requirement of EN 12 004 and is suitable for mortar bed thicknesses up to 10 mm.

Data sheet

Applications

For earthenware, stoneware, fine stoneware
For natural stone flooring resistant to discolouration and deformation
For floor and wall, on underfloor heating
For interior and exterior use
On calcium sulphate and cementitious screeds, concrete
On heated substrates
On gypsum, lime cement and cement plaster
On gypsum plasterboards and gypsum fibreboards, tile carrier elements

Properties

Up to 90% less dust development during mixing
Smooth consistency - very easy to process
Low-slump, for the application of wall coverings
Extended working time
Suitable up to 10 mm mortar bed thickness
Suitable for levelling small areas
High bonding adhesion
Meets the requirement C2 TE S1 according to EN 12004
Adhesive strength ≥ 1,0 N/m m²
S1: bending path ≥ 2.5 N/mm²
Low chromate content acc. Regulation (EC) No. 1907/2006 (REACH)
Highest quality level 4 according to DGNB criterion ENV 1.2 Risks for the local environment
EMICODE EC1 PLUS / very low-emission
For healthy construction

codex Power CX 5 is a particularly high-quality, plastic-improved C2 thin-bed mortar, which through the addition of an additive is significantly dust-reduced and thus protects the health of the processor.

*At 23 °C and 50% rel. humidity.
Pack type	paper bag
Pack size	25 kg
Shelf life	12 months
Color	light grey
Minimum working temperature	+ 5 °C to + 25 °C
Ideal working temperatures	+ 10 °C to + 25 °C
Water quantity required	0,30 - 0,34 litres/ kg 7.5 – 8.5 litres/ 25 kg
Working Time/ Pot Life	approx. 5 hours^*
Working time	approx. 30 minutes^*
Set to foot traffic	after approx. 12 hours^*
Ready for jointing	after approx. 12 hours^*
Resilient	after approx. 72 hours^*
Final strength	after approx. 28 days^*
Consumption	1.7 - 3.0 kg/m²