Do you have any questions?

We are happy to help.

[CX International] Flyout

Consulting

Customer service

Technical support

Location

Codex near you

Do you have any questions?

We are happy to help.

[CX International] Flyout

Consulting

Customer service

Technical support

Location

Codex near you

Renovation of the sales area.

Data

Building type Warehouses and car dealerships
Area (m²) 6.000 m²
CountryGermany
FloorerOsterbrink Objekt Verlege GmbH

In the Huma shopping park St. Augustin the entire sales area was renovated. Osterbrink Objekt Verlege GmbH took on the project of over 6,000 m². In order to guarantee the early load-bearing capacity of the floor surfaces, codex products were used. The use of rapid products such as codex RX 6 Turbo enabled the required rapid installation performance to be achieved. Porcelain stoneware tiles were laid in the dimensions 30 x 30 cm and 30 x 60 cm.


All codex products used:

- codex FM 30
- codex FM 50 Turbo
- codex Power CX 3
- codex Power RX 6 Turbo
- codex Brillant Flex Basic

Products used

FM 30

codex FM 30 is a self-levelling cement floor levelling compound for a layer thickness of 3-30 mm. Thanks to fast drying, a reduced waiting time is achieved.

FM 50 Turbo

The tile filler codex FM 50 Turbo is a self-levelling cement floor levelling compound for layer thicknesses of 3-50 mm. codex FM 50 Turbo hardens very quickly and is ready for covering early, even in thick layers.

Power CX 3

The flexible thin-bed mortar codex Power CX 3 is universally usable and suitable for all ceramic wall and floor coverings.
Thanks to its plastic coating, it meets the C2 TE S1 requirement of EN 12 004 and is suitable for mortar bed thicknesses up to 10 mm.
The codex Power CX 3 is also available in a white version for use with translucent ceramics.

Power RX 6 Turbo

The rapid setting, highly flexible thin- and flow-bed mortar codex Power RX 6 Turbo is suitable for the installation of wall and floor coverings.

Brillant Flex Basic

The codex Brilliant Flex Basic jointing mortar is water-repellent, flexible and suitable for joint widths of 3 - 15 mm. Due to its rapid hardening, the surfaces can be used soon after application.