Power Xtra-Time Variable 2-component thin-bed mortar

Cementitious Flex thin-bed mortar with variably adjustable working time


  • For rapid construction
  • For existing renovations
  • For fine and coarse ceramic tiles and slabs
  • For fine stoneware in interior areas
  • For bondable insulating and lightweight boards
  • On gypsum carton
  • On tile carrier elements
  • On cement, lime-cement, gypsum plaster
  • On concrete
  • On calcium sulphate and cement screeds
  • For underfloor heating
  • For interior and exterior use


  • Versatile application 
  • Smooth consistency - very easy application
  • Very good curing even at low temperatures
  • Suitable up to a mortar bed thickness of 10 mm
  • Suitable for filling small areas
  • High bond strength
  • Meets requirements C2 F S1 according to EN 12004
  • Tensile bond strength ≥ 1.0 N/mm²
  • Low chromate content according to EU-VO 1907/2006 (REACH)
  • Highest quality level 4 according to DGNB criterion ENV 1.2 Risks for the local environment
  • EMICODE EC1 PLUS / Very low emissions
  • For healthy building

Technical data

*At 23 °C and 50% rel. humidity.
Pack type

paper bag, plastic bottle

Pack size

comp. A 25 kg powder,
comp. B 1 l retarder

Shelf life

comp. A 6 months
comp. B 24 months

Minimum working temperature

+ 5 °C to + 25 °C

Ideal working temperatures

+ 10 °C to + 25 °C

Water quantity required

0.28 - 0.32 litres per kg powder
15 - 40 ml solution per litre mixing water

Working Time/ Pot Life

35 - 75 min*

Set to foot traffic

60 min. after end of pot life*

Ready for jointing

60 min. after end of pot life*


after approx. 48 hours*

Final strength

after approx. 72 hours*

Ordering information

Article Article number Packsize Shipping unit
codex Power Xtra-Time A / 25 kg 173600 25 kg
Pallet :
42 bags
codex Power Xtra-Time B / 1 l 173601 1 l
Pack :
6 pieces

Quality seals and badges


Products and accessories

LS 1 Leveling system with wedges

Leveling system existing of wedges, level-clips and tong

LS 2 Leveling system with spin caps

Leveling system existing of spin caps and screw-clips

Mixing bucket 30 l

The codex mixing bucket is a very sturdy plastic bucket with handles for mixing all codex powder and epoxy products.

Water bucket Water bucket

The codex water bucket is a transparent plastic bucket with an imprinted litre scale for measuring the correct amount of water for codex powder products.

Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools