Low-dust flex thin-bed mortar

Power CX 5

The flexible, low-dust, thin-bed mortar codex Power CX 5 is for the installation of ceramic wall and floor coverings.
Thanks to its plastic coating, it meets the C2 TE S1 requirement of EN 12 004 and is suitable for mortar bed thicknesses up to 10 mm.

Data sheet

Consumption calculator

Applications

for earthenware, stoneware, fine stoneware
for natural stone flooring resistant to discolouration and deformation
for floor and wall, on underfloor heating
for interior and exterior use
on calcium sulphate and cementitious screeds, concrete
on heated substrates
on gypsum, lime cement and cement plaster
gypsum plasterboards and gypsum fibreboards, tile carrier elements

Properties

up to 90% less dust development during mixing
smooth consistency - very easy to process
low-slump, for the application of wall coverings
extended working time
suitable up to 10 mm mortar bed thickness
suitable for levelling small areas
high bonding adhesion
meets the requirement C2 TE S1 according to EN 12004
adhesive strength ≥ 1,0 N/m m²
S1: bending path ≥ 2.5 N/mm²
low chromate content according to EU-VO 1907/2006 (REACH)
Highest quality level 4 according to DGNB criterion ENV 1.2 Risks for the local environment
EMICODE EC1 PLUS / very low-emission
for healthy construction

codex Power CX 5 is a particularly high-quality, plastic-improved C2 thin-bed mortar, which through the addition of an additive is significantly dust-reduced and thus protects the health of the processor.

Downloads

codex Power CX 5_GB

910 KB / PDF

910 KB

DoP_codex PowerCX5_(GB)

127 KB / PDF

127 KB

EC1_PLUS_Power_CX5_GB

294 KB / PDF

294 KB

Power_CX5_(GB)

202 KB / PDF

202 KB

Technical data

Pack type	paper bag
Pack size	25 kg
Shelf life	12 months
Color	light grey
Minimum working temperature	+ 5 °C up to + 25 °C
Ideal working temperatures	+ 10 °C up to + 25 °C
Water quantity required	0,30 - 0,34 litres/ kg 7.5 – 8.5 litres/ 25 kg
Working time	approx. 5 hours^*
Set to foot traffic	approx. 12 hours^*
Resilient	after approx. 72 hours^*
Ready for jointing	after approx. 12 hours^*
Final strength	after approx. 28 days^*
	*At 23 °C and 50% relative humidity.