Multi-Flex Mortar

Power CX 7

The lightweight multi-flex adhesive, codex Power CX 7, can be adjusted according to the tiler's needs as a flow-bed, thin-bed or medium-bed mortar or for levelling and thus covers 90% of all tiling work. Thanks to lightweight fillers, the CX 7 is not only productive but also particularly light.

Data sheet

Consumption calculator

Applications

for earthenware, stoneware, fine stoneware
for tiles stones with larger thickness tolerances
for largely cavity-free installation
for natural stone flooring resistant to discolouration and deformation
for large formats
for floor and wall, on underfloor heating
for interior and exterior use
on calcium sulphate and cementitious screeds, concrete
on heated substrates
on gypsum, lime cement and cement plaster
gypsum plasterboards and gypsum fibreboards, tile carrier elements

Properties

variable adjustable consistency
thin-, medium-, flow-bed installation
ergonomic carry-handle
14 kg bag for back-friendly work
smooth consistency - very easy to process
low-slump, for the application of wall coverings
extended working time
suitable up to 10 mm mortar bed thickness
suitable for levelling small areas
high bonding adhesion
meets the requirement C2 TE S1 according to EN 12004
adhesive strength ≥ 1,0 N/m m²
S1: bending path ≥ 2.5 N/mm²
low chromate content according to EU-VO 1907/2006 (REACH)
Highest quality level 4 according to DGNB criterion ENV 1.2 Risks for the local environment
EMICODE EC1 PLUS / very low-emission
for healthy construction
1st place tiles and slabs reader's choice 2019: category thin-bed mortar

Powerful in performance - Light in weight. The codex Power CX 7 is a real all-rounder and covers 90% of all tiling works.

Downloads

codex Power CX 7_GB

563 KB / PDF

563 KB

DoP_codex PowerCX7_(GB)

132 KB / PDF

132 KB

EC1_Plus_Power_CX_7_GB

276 KB / PDF

276 KB

Power_CX7_(GB)

235 KB / PDF

235 KB

Technical data

Pack type	paper bag
Pack size	14
Shelf life	12 months
Color	grey
Minimum working temperature	+ 5 °C up to + 25 °C
Ideal working temperatures	+ 10 °C up to + 25 °C
Water quantity required	Thin-bed: 7.6 litre/ 14 kg Medium-bed: 7.3 litre/ 14 kg Flow-bed: 8.4 litre/ 14 kg Smoothing: 7.6 litre/ 14 kg
Working time	approx. 2.5 hours^*
Set to foot traffic	approx. 12 hours^*
Ready for jointing	after approx. 12 hours^*
Final strength	after approx. 28 days^*
	*At 23 °C and 50% relative humidity.